Panasonic VL-SW102BX Operating Instructions Manual

Also see for VL-SW102BX: Installation guide

Contents

Panasonic VL-SW102BX Operating Instructions Manual Manual pdf 21 page image

Doorphone21Answering a callWhen you receive a call from a door station, the main monitor station and the sub monitor station ring and the TALK indicatorsflash. You can monitor the visitor on the monitor display before answering a call.{OFF}{TALK}TALK indicator{BRIGHT}{▲ } {▲}{OFF}{TALK}TALK indicator{▲ } {▲}{BRIGHT}1 When a ringer tone is heard, press {TALK}.2 Speak to the visitor.L�Speak alternately with the visitor.(If you and the visitor speak at the same time, you will not hear each other.)N�To adjust the speaker volume:Press {▲ } or {▲}.N�To adjust the display brightness:Press {BRIGHT} (page 11, 13).3 To end the conversation, press {OFF}.Note:L�If you do not answer a door call within 30 seconds, the display will turn off.A conversation will be automatically disconnected in about 90 seconds and then the display will turn off.To turn on the display and talk to the visitor again, press {TALK}.L�The image taken by the door station is automatically recorded. Even if you do not answer a call, the image is recorded(page 30).L�You can record an image manually while monitoring the display during a call (page 31).L�You can change the ringer tone and the ringer volume (page 43, 44).L�At night or when there is not enough lighting in the doorway, the display will be shown in black and white.When using an additional door station or camera:L�When you receive another call from an additional door station or an additional camera while receiving a previous call, thedisplay is switched to the image from the device calling later.L�When you receive another call from an additional door station or an additional camera during conversation, see page 24.