Panasonic VL-SW102BX Operating Instructions Manual

Also see for VL-SW102BX: Installation guide

Contents

Panasonic VL-SW102BX Operating Instructions Manual Manual pdf 27 page image

Camera (optional)27Monitoring the view from the camera (Camera monitor)You can monitor the sound and camera of the place where the camera is located.(You can operate this feature in the same way by using either the main monitor station or the sub monitor station.){▲ } {▲}{CAMERA}{OFF}{TALK}{BRIGHT}{CAMERA}{OFF}{TALK}{BRIGHT}{▲ } {▲}1 Press {CAMERA}.L�The image taken by the camera will be shown on the display, and you will hear the sound from the camera. (The soundfrom your end will not be heard at the camera.)N�To speak to the other party at the camera:Press {TALK}.N�To adjust the speaker volume:Press {▲ } or {▲}.N�To adjust the display brightness:Press {BRIGHT} (page 11, 13).L�When 2 or more cameras are registered, press {CAMERA} repeatedly to select the desired camera.(Example: When 4 cameras are registered.)Camera 1Camera 2Camera 3Camera 42 To end monitoring, press {OFF}.Note:L�Monitoring will automatically end in about 90 seconds.L�When you receive another call from the door station or another camera while monitoring or during conversation, see page29.L�Quality of images taken by the camera: (The following can occur)– A moving person is blurred because of the still image.– The person’s face becomes dark when direct sunlight shines on the camera lens.– The picture color is different from the actual color.– The image looks misty under fluorescent lights.