Panasonic VL-SW102BX Operating Instructions Manual

Also see for VL-SW102BX: Installation guide

Contents

Panasonic VL-SW102BX Operating Instructions Manual Manual pdf 36 page image

36IntercomTalking between the main monitor station and the sub monitor stationIntercom calls between the main monitor station and the sub monitor station can be made. (The other party’s image is notdisplayed.)Making an intercom call from the main monitor station{PAGE}{OFF}TALK indicator{TALK}Caller (Main monitor station) Receiver (Sub monitor station)1 During standby, press {PAGE} and talk to the otherparty.L�The TALK indicator lights up.1 When the paging call is heard, press {TALK}.2 When the paged party answers the call, talk with thepaged party.2 Talk with the other party.3 To end the intercom call, press {OFF}.L�The intercom call is disconnected.Note:L�An intercom call will automatically end in about 90 seconds.L�When using multiple sub monitor stations, all sub monitor stations are paged in step 1.When receiving a call from the door station or the camera (optional) during an intercom call:1 Press {OFF} to end the intercom call.2 Answer the call (when received from the door station, see page 21, or when received from the camera, see page 28).When using multiple sub monitor stations, you can page them individually from the main monitor station.This feature must be set beforehand (“PAGE” on page 39).1 Press {PAGE}, and then select the desired sub monitor station by pressing {▲ } or {▲}.2 Press {D} and talk to the paged party.LOnly paged party can hear the paging call.3 When the paged party answers, talk with the paged party.