English - 29 -ConnectivityWired ConnectivityTo Connect to a Wired Network• You must have a modem/router connected to anactive broadband connection.• Connect your TV to your modem/router via anEthernet cable. There is a LAN port at the rear(back) of your TV.2311. Broadband ISP connection2. LAN (Ethernet) cable3. LAN input on the rear side of the TVTo configure wired settings refer to the Networksection in the Settings menu.• You might be able to connect your TV to your LANdepending on your network’s configuration. In sucha case, use an Ethernet cable to connect your TVdirectly to the network wall outlet.121. Network wall socket2. LAN input on the rear side of the TVConfiguring Wired Device SettingsNetwork TypeThe Network Type can be selected as Wired Device,Wireless Device or Disabled, in accordance with theactive connection to the TV set. Select this as WiredDevice if you are connecting via an Ethernet cable.Internet Speed TestHighlight Internet Speed Test and press the OKbutton. TV will check the internet connection bandwidthand display the result when complete.Advanced SettingsHighlight Advanced Settings and press the OKbutton. On the next screen you can change the IP andDNS settings of the TV. Highlight the desired one andpress Left or Right button to change the setting fromAutomatic to Manual. Now you can enter the ManualIP and / or Manual DNS values. Select the related itemin the drop down menu and enter the new values usingthe numeric buttons of the remote. Highlight Save andpress the OK button to save settings when complete.Wireless ConnectivityTo Connect to a Wireless NetworkThe TV cannot connect to the networks with a hiddenSSID. To make your modem’s SSID visible, you shouldchange your SSID settings via the modem’s software.11. Broadband ISP connectionA Wireless-N router (IEEE 802.11a/b/g/n) withsimultaneous 2.4 and 5 GHz bands is designed toincrease bandwidth. These are optimized for smootherand faster HD video streaming, file transfers andwireless gaming.• The frequency and channel differ depending onthe area.• The transmission speed differs depending on thedistance and number of obstructions between thetransmission products, the configuration of theseproducts, the radio wave conditions, the line trafficand the products that you use. The transmission mayalso be cut off or may get disconnected dependingon the radio wave conditions, DECT phones or anyother WLAN 11b appliances. The standard values ofthe transmission speed are the theoretical maximumvalues for the wireless standards. They are not theactual speeds of data transmission.