Panasonic TX-22LT2F Operating Instructions Manual

Also see for TX-22LT2F: Service manual Service manual

Panasonic TX-22LT2F Operating Instructions Manual Manual pdf 6 page image

6Quick start Guide1. Choose Your Connection TypeConnection and setting up options• If connecting the TV using an RF cable only, see below.• If connecting the TV using Scart and RF cables, see page 7.• If connecting the TV to a Q-Link (or Q-Link compatible) VCR, see page 7.• If connecting the TV to a Q-Link (or Q-Link compatible) VCR and a satellite receiver, see page 8.What is Q-Link?Q-Link allows direct communication between the TV and a Q-Link (or Q-Link compatible) VCR, this will enablefeatures such as downloading of tuning information from the TV to the VCR.When using a “NEXTVIEWLINK” VCR the main features possible are the following:• Preset Download Downloading of tuning information from the TV to the VCR.• Direct TV Record For immediate recording of the current program (What You See Is What You Record).When using a “Q-Link” VCR the main features possible are the following:• Preset Download Downloading of tuning information from the TV to the VCR.• Direct TV Record For immediate recording of the current program (What You See Is What YouRecord).• TV/VCR Auto Power On When the VCR plays a tape the TV will automatically switch On (From Stand-by) and select the AV2 input.• VCR Auto Power Stand-by When the TV is switched into Stand-by, the VCR will also switch into Stand-by.• VCR Image view On If the TV is in Stand-by mode and the VCR sends a menu to be displayed onthe TV screen (e.g. Main menu), the TV will automatically switch On and themenu will be displayed.This TV will also communicate with other VCRs that bear the following logos:• “DATA LOGIC” (a trademark of Metz Corporation).• “Easy Link” (a trademark of Philips Corporation).• “Megalogic” (a trademark of Grundig Corporation).• “SMARTLINK” (a trademark of Sony Corporation).These VCRs may support some or all of the above funcitons. Refer to the VCR operating instruction book.Further information on Q-Link can be found on page 10.In order for Q-Link to function correctly, the Scart cables must be connected in a certain way, dependent onwhether the TV is being connected to a VCR or to a VCR and Satellite Receiver.1. Connecting the TV directly to an aerial onlyRF connectionConnect the Aerial lead into the TV Aerial socket ( ).Aerial Input socketAerial(Not Supplied)LCD TVAerial Lead