24Tuning menuFine tuningHow to Cancel the Fine TuningUnder normal reception conditions this function is not required or necessary.However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve thepicture and sound quality.1 Press to select the Fine tuning.Press until the clear picture is received.2 Press to store the Fine tuning.This stores the Fine tuning to the selected Programme Number.3 Press to exit from the Fine tuning.This returns the set to the normal viewing condition.TV/AVCancelling previously adjusted (manually) fine tuning, means re-activating the AFT (Automatic Fine Tuning). Re-activating the Automatic Fine Tuning means allowing the set to automatically tune to the optimum tuning position, forthat programme Number.1 Select the Programme Number which you’d like toreturn to Automatic Fine Tuning (cancel the manualfine tuning).2 Press to display the Setup menu screen.Proceed to the Tuning menu (refer to page 17).3 Press to select the Manual tuning.Press to access to Manual tuning.Press briefly to tune the best position.4 Press to store the AFT.This stores the re-activated AFT.5 Press to exit from the Manual tuning.This returns the set to the normal viewing condition.STRSTRTV/AVDecoder (AV2)Volume correc.Programme editAuto setupManual tuningFine tuningColour systemTuning menuAutoOffDecoder (AV2)Volume correc.Programme editAuto setupManual tuningFine tuningColour systemTuning menuAccessAutoOffSET UP