- 61 -■ To adjust the clockIf you cannot get the time information, set Clock Settings manually.1. Display the menu with MENU2. Select Timer Clock Settings Mode with / and press OK toaccess3. Select Manual with / and press OK to set4. Set Date / Time with / / / or numeric buttons● Clock Settings are reset when the TV is turned off with Mains power On /Off switch.Settings Timer Clock Settings■ To play back or delete the recorded contentsTV programmes recorded on the USB HDD with this TV can be played backin Media Player.1. Display icons of the feature with APPS2. Select Recorded TV with / / / and press OK to accessMedia Player Recorded TV modeNote● TV Guide may also be used to set timer programming event.Watching TV Guide Timer Programming● Timer Programming can store up to 15 events.● Timer Programming only works reliably if correct time information isreceived via the signal from the broadcaster or service provider.● For recording using Timer Programming, the TV must be either on or inStandby. For reminders to be displayed, the TV must be on.● No other channels can be selected while the recording of TimerProgramming is in progress.● Recording an encrypted (copy-protected) programme may not be possible.● 2 minutes before the starting time, a reminder message appears if you arewatching TV.– To remove the message and start the programming, press OK.– To cancel the programming, press EXIT.● LED will turn to orange in Standby mode if Timer Programming is set.
