- 137 -● Recorder:Maximum 3 (DIGA Recorder, etc.)● Player:Maximum 3 (DVD Player, Blu-ray Disc Player, HD Video Camera,LUMIX Camera, Digital Camera, Player theatre, Blu-ray Disc theatre,etc.)● Audio system:Maximum 1 (Player theatre, Blu-ray Disc theatre, Amplifier, etc.)● Tuner:Maximum 4 (Set top box, etc.)Preparations● Connect the equipment supporting VIERA Link.● For VIERA Link connectionsFunctions VIERA Link “HDAVI Control™” Summary of VIERA Link● Use a fully wired HDMI compliant cable. Non-HDMI-compliant cablescannot be used.● Set up the connected equipment. Read the manual of the equipment.● Set VIERA Link to On in the Setup Menu.Settings Setup VIERA Link Settings● Set up the TV. After connection, turn the equipment on and then switch theTV on. Select the HDMI input from Input Selection with AV and make surethat an image is displayed correctly. (This setup should be done each timethe following conditions occur.)– first time operation– adding or reconnecting equipment– changing setupEasy playbackAutomatic input switching - When the connected equipment is operating, theinput mode is switched automatically.Power on LinkSet Power on Link to On in the Setup Menu to use this function.Settings Setup VIERA Link SettingsWhen the connected equipment starts playback or direct navigator / functionmenu for the equipment is activated, the TV is automatically turned on. (Onlywhen the TV is in Standby mode.)
