- 50 -Auto TuningAutomatically retunes the channels received in the area.● All the previous tuning settings are erased.● Search begins in the order from the lower channels to the higher channels.● If tuning has not been done completely, set Manual Tuning.Watching Tuning and editing channels Manual Tuning1. Select Auto Tuning with / and press OK to access2. The confirmation screen is displayed and press OK to start Auto Tuning(Settings are made automatically)● When the operation is completed, the channel at the lowest position willbe displayed.● This setting is applicable only for the selected TV mode.■ Auto Tuning using the buttons on the TV1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds todisplay the menu2. Set Auto Tuning with following control panel buttons● Move the cursor / select from a range of options / select the menu item(up and down only)● Access the menu / store settings after adjustments have been made oroptions have been set with INPUT/OK/HOLD for MENU button.Manual Tuning■ Digital TVNormally use Auto Tuning or Update Channel List to retune Digital TVchannels.If tuning has not been done completely or for adjusting the direction of theaerial, use this function.● All Digital channels found will be added to Channel List.1. Select physical channel with / and select offset with /2. Press OK to search
