Panasonic TH-80OLFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Panasonic TH-80OLFB70U Operating Instructions Manual Manual pdf 4 page image

4LCD DisplayDeclaration of Conformity (DoC)“Hereby, Panasonic Corporation declares that this Display is in compliance with the essentialrequirements and other relevant provisions of the Directive 1999/5/EC.”If you want to get a copy of the original DoC of this Display, please visit the following website:http://www.doc.panasonic.deAuthorized Representative:Panasonic Testing CentrePanasonic Marketing Europe GmbHWinsbergring 15, 22525 Hamburg, GermanyThis Display is intended to be used in the following countries.Albania, Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Italy, Iceland, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United KingdomThe wireless LAN feature of this Display shall exclusively be used inside buildings.About built-in wireless LAN■ CAUTION:Be aware of the following limits before using the Wireless LAN Module.● To use the Wireless LAN Module, an access point needs to be obtained.● Do not use the Wireless LAN Module to connect to any wireless network (SSID*) for which you do not haveusage rights. Such networks may be listed as a result of searches. However, using them may be regarded asillegal access.*SSID is a name for identifying a particular wireless network for transmission.● Do not subject the Wireless LAN Module to high temperatures, direct sunlight or moisture.● Do not bend, or subject the Wireless LAN Module to strong impacts.● Do not disassemble or alter the Wireless LAN Module in any way.● Do not attempt to install the Wireless LAN Module in any incompatible device.● Do not remove the Wireless LAN Module from the host product during operations.● Data transmitted and received over radio waves may be intercepted and monitored.● To avoid malfunctions caused by radio wave interface, keep the host product away from the devices such asother wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using theWireless LAN Module.● When noises occur due to the static electricity, etc., the host product might stop operating for the protection ofthe devices. In this case, turn the host product Off with Mains power On / Off switch, then turn it On again.● Depending on the area, this Wireless LAN Module may not be available.Read this first!