Panasonic TH-55LFV70U Operating Instructions Manual

Also see for TH-55LFV70U: Operating instructions Operation instruction Operating instructions

Contents

Panasonic TH-55LFV70U Operating Instructions Manual Manual pdf 68 page image

68SETUP DIGITAL LINK statusDisplay the DIGITAL LINK connection environment.Select “DIGITAL LINK status” and press .DIGITAL LINK statusLINK statusHDMI statusNo linkNo HDMISignal qualityMin -0 dB-0 dBMaxLINK status Either “No link”, “DIGITAL LINK”, or “Ethernet” will be displayed.No link : No LAN connection, etc.DIGITAL LINK : Connected to the DIGITAL LINK device by LANEthernet : The PC is connected to the DIGITAL LINK terminal of this product and is LAN connectedHDMI status Either “No HDMI”, “HDMI ON”, or “HDCP ON” will be displayed.No HDMI : DIGITAL LINK not connectedHDMI ON : DIGITAL LINK connectedHDCP ON : A signal with an HDCP is flowing with a DIGITAL LINK connection.Signal quality It is the quantified minimum and maximum numbers of errors that have occurred. The displaycolours are red, yellow, or green, depending on the number.The number is represented by yellow or red if the LAN cable is disconnected or the cable isnot shielded. This signal quality shows figures between the twisted pair cable transmitter that isconnected and the display.Signal Quality Display Colours Reception Status-12dB or below Green The reception is normal-11 to -8dB Yellow Part of the receiveddata is corrupted-7dB or above Red There are receptiondifficulties Digital Interface BoxA switch will be made to the Set up Digital Interface Box menu when “Digital Interface Box” is selected and ispressed.Note:• This function can only be selected when the Digital Interface Box (ET-YFB100) made by our company is connectedto a LAN terminal and its power is on.