Panasonic TH-55LFV70U Operating Instructions Manual

Also see for TH-55LFV70U: Operating instructions Operation instruction Operating instructions

Contents

Panasonic TH-55LFV70U Operating Instructions Manual Manual pdf 52 page image

52SETUP• This function will start operating once a video signal is detected by both the input in use for viewing and the backupinput and the “Status” item is displayed as “ACTIVE”.Primary Backup InputSets the first priority backup input.HDMI, DisplayPort, DIGITAL LINK, DVI-D1, DVI-D2, PC, Component or VIDEO can be settable as the input.The input that is of the same type as the one in use for viewing will be greyed out.When an analogue (PC, Component or VIDEO) input is being used for viewing, you cannot set an analogue (PC,Component or VIDEO) input as a backup input.Any analogue (PC, Component or VIDEO) input cannot be set as Primary Backup Input or Secondary BackupInput.Secondary Backup InputSets the second priority backup input.HDMI, DisplayPort, DIGITAL LINK, DVI-D1, DVI-D2, PC, Component or VIDEO can be settable as the input.The input that is of the same type as the one in use for viewing will be greyed out.When an analogue (PC, Component or VIDEO) input is being used for viewing, you cannot set the analogue (PC,Component or VIDEO) input as a backup input.Any analogue (PC, Component or VIDEO) input cannot be set as Primary Backup Input or Secondary BackupInput.Auto switch back modeSets whether or not to automatically return to the former (main) input when the former input video initially viewed isrestored while viewing the video of the backup input enabled by the operation of the Backup Input function.OFF: unreturnedON: returnedBackup input changeDisplays whether or not operating conditions for the Backup Input function are met.INACTIVE: indicates that the conditions are not met, and disables the Backup Input function.ACTIVE: indicates that the conditions are met, and enables the Backup Input function.Main InputDisplays the (main) input initially used for viewing.Current Input StatusDisplays whether the input currently in use for viewing is the (main) input initially used for viewing or the backupone.Setting conditionsThe following table describes restrictions (available combinations) on each setting item.MainHDMI USB PC ComponentDisplayPort orDIGITAL LINK VIDEODVI-D1DVI-D2BackupHDMIo x o oDisplayPortDIGITAL LINKDVI-D1DVI-D2USB o - o oPC o x - xComponento x x -orVIDEO