35PICTURE AdjustmentsHow to adjust colour temperaturePictureDefault DefaultPicture mode Normal2.26500KBacklight 50Contrast 50Brightness 50Colour 50Hue 50Sharpness 50GammaColour temperatureDynamic contrast 5Colour enhancementMemory saveMemory loadMemory deleteOff1234Press to select the mode for adjustment.Press to select the mode “User1” or “User2”.Press to select “Yes” or “No”.(For the case that the mode between 3200K to 10700K is selected)(For the case the modes between 3200K to 10700K is selected)Press to select “Colour Temperature”.Press to enter to “Adjust colour temperature” menu.Press to enter to next procedure.Press to enter to next procedure.By selection the modes; from 3200K to 10700K, adjustment based ontheir data is available. Adjusted data is saved to “USER1” or “USER2”. (It is available to select.) For the case “USER1”or “USER2” is selected, go to step 5.Adjust Colour TemperatureChange to 9300KUSER 1USER 2Adjust Colour TemperatureOverwrite USER1 dateNoYesPress to select the item for adjustment .Press to adjust the each item. W/B drive RW/B drive GW/B drive BW/B Cutoff RW/B Cutoff GW/B Cutoff BAdjust Colour TemperatureChange USER112825512800056 Press to exit from “Adjust colour temperature” menu.Dynamic contrast :Automatically adjusts the contrast by determining the changes in the use of colours for images that constantlychange, such as motion pictures.Color Enhancement :Sets whether to ON / OFF the Color Enhancement function.While sets to ON, displays images by emphasising colours.Press the left or right button to switch between modes.OFFON