Panasonic TH-42PF30ER Operating Instructions Manual

Contents

Panasonic TH-42PF30ER Operating Instructions Manual Manual pdf 48 page image

1/2Signal3D SettingsScreensaverExtended life settingsInput labelOffStandby save OffPC Power management OffNo activity power off EnableOSD Language English (UK)YUV/RGB-in selectRGBPower saveSetupDVI-D Power management OffNo signal power off Disable48Setup for Input SignalsComponent / RGB-in selectSelect to match the signals from the source connected to the Component / RGB or PC input terminals.Y, PB , PR signals “Component”RGB signals “RGB”12Press to display the Setup menu.Press to select the “Component / RGB-in select”.Press to select the desired input signal.Component RGBPress to exit from adjust mode.Note:Make setting of the selected input terminal (COMPONENT/RGB IN or PC IN).3YUV / RGB-in selectSelect to match the signals from the source connected to the DVI input terminals.YUV signals “YUV”RGB signals “RGB”12Press to display the Setup menu.Press to select the “YUV / RGB-in select”.Press to select the desired mode.YUV RGBPress to exit from adjust mode.Notes:• Selection may not be possible, depending on which optional board is installed.• Make setting of the selected input terminal (SLOT or DVI-D IN).31/2Signal3D SettingsScreensaverExtended life settingsInput labelOffStandby save OffPC Power management OffNo activity power off EnableOSD Language English (UK)Component/RGB-in selectRGBPower saveSetupDVI-D Power management OffNo signal power off Disable