Panasonic TH-42PF30ER Operating Instructions Manual

Contents

Panasonic TH-42PF30ER Operating Instructions Manual Manual pdf 9 page image

9+-+-Accessories SupplyAccessoriesPower supply cord Clamper × 1TMME289Ferrite core × 2J0KG00000014Batteries for the RemoteControl Transmitter(R6 (UM3) Size × 2)Remote ControlTransmitterN2QAYB000535Operating Instruction bookCheck that you have the accessories and items shownRemote Control BatteriesRequires two R6 batteries.1. Pull and hold the hook, then openthe battery cover.2. Insert batteries - note correctpolarity ( + and -).3. Replace the cover.Use the Ferrite cores to complywith the EMC standard.(see page 60)Helpful Hint:For frequent remote control users, replace old batteries with Alkalinebatteries for longer life.Precaution on battery useIncorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.Disposal of batteries should be in an environment-friendly manner.Observe the following precaution:1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.2. Do not combine a used battery with a new one.3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.5. Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.6. Do not burn or breakup batteries.Batteries must not be exposed to excessive heat such as sunshine, re or the like.“R6 (UM3)” sizeCD-ROM(Operatinginstructions)