Panasonic TH-42PF30ER Operating Instructions Manual

Contents

Panasonic TH-42PF30ER Operating Instructions Manual Manual pdf 11 page image

,Y, PB , PROUTP RP BYAUDIOOUTRLVIDEOOUTAUDIOOUTRL11ConnectionsVIDEO and COMPONENT / RGB IN connectionVideo equipment connectionSLOT: Terminal board (optionalaccessories) insert slot (seepage 4)Note:The right side slot is for terminalboard with 2-slot width. Theterminal board with 1-slot widthdoes not function when installedin the right side slot.LAN: Connect to a network to control the unit. (seepage 60) Terminals are on thebottom side of thePlasma Display.AV IN (VIDEO): Composite Video Input Terminal (see below)COMPONENT/RGB IN: Component/RGB Video Input Terminal(see below)AV IN (HDMI): HDMI Input Terminal (see page 12)Connect to video equipment such as VCR or DVD player.3D IR TRANSMITTER:Connect the 3D IRTRANSMITTER(optional accessory).SERIAL: Control thePlasma Displayby connectingto PC (seepage 14)Notes:• Change the “Component/RGB-in select” setting in the “Setup”menu to “Component” (when Component signal connection) or“RGB” (when RGB signal connection). (see page 48)• Signals input to COMPONENT/RGB IN terminals correspond toSync on G or Sync on Y.RCA-BNCAdapter plugRCA-BNCAdapter plugDVD PlayerVCRComputer RGB CamcorderNote:Additional equipment, cables and adapter plugsshown are not supplied with this set.DVI-D IN: DVI-D Input Terminal(see page 12)PC IN: PC Input TerminalConnect to video terminal of PCor equipment with Y, PB(CB) andPR(CR) output (see page 12).