Panasonic TH-42PF30ER Operating Instructions Manual

Contents

Panasonic TH-42PF30ER Operating Instructions Manual Manual pdf 45 page image

45Setup for MULTI DISPLAYItem DetailsAI-SynchronizationSelect “Off” or “On”. The brightness depends on eachdisplay’s setting.Equalize the brightness of all thedisplays.Off OnNotes:• If you set AI-synchronization to On, the following menus will be unavailable and thesesettings will be xed to the initial values.Picture menu: Colour, Hue, Input level (Advanced settings)• This function cannot be adjusted during input from VIDEO terminal.Press to exit from Setup.4You can set the remote control ID when you want to use this remote control on one of several different displays.Note:To operate this function, please purchase ID remote controller sold separately.Object model : EUR7636090R123Switch to on the right side.Press the button on the remote control.Press one of - , for the tens digit setting.Press one of - , for the units digit setting.4Notes:• The numbers in 2, 3 and 4 should be set up quickly.• Adjustable ID number range is 0 - 99.• If a number button is pressed more than two times, the rst two numbers become the ID number for the remotecontrol.ID CancellationPress button on remote control. (This has the same effect as pressing the , , buttons at the same time.)Notes:• Set the Remote ID “On” to operate the ID remote control.If Remote ID is set to “On”, you can use the remote control without identical ID number during option menu display.(see page 54)• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID isnot the same as the ID select number (see page 54).ID remote control button operationThe operation is the same as normal remote control except for the button.ID Remote Control Function