Panasonic TH-42LFE6E Operating Instructions Manual

Also see for TH-42LFE6E: Operating instructions Service manual

Contents

Panasonic TH-42LFE6E Operating Instructions Manual Manual pdf 42 page image

Options 1/3On screen displayInput SearchOnInitial input OffOffOff00Maximum VOL levelInitial VOL levelOffInput lockOffButton lockOffRemocon User levelOptionsEnableOff-timer functionNormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffStudio W/B2/33/3OptionsOffClock DisplayOffPower ON Screen DelayFunction button assign 1Power On Message (No activity power off)OnSignalFunction button assign 2 Screensaver4242Item AdjustmentsInput Search Set auto input switching for when there is no signal. (see page 44)On screen displayOn: Displays all the following on screen.• Power on display• Input signal switch display• No signal display• Mute and the remaining time of off-timer after was pressed.Off: Hides all the items above from view.Initial inputAdjusts the input signal when the unit is turned on.Off PC DVI HDMI OffNotes:• Only the adjusted signal is displayed. (see page 15)• This menu is available only when “Input lock” is “Off”.Initial VOL levelPress button to adjust the volume when the unit is turned on.Off OnOff: Sets normal volume.On: Sets your preferred volume.Notes:• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximumrange.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.Maximum VOL levelPress button to adjust the maximum volume.Off OnOff: Sets auto maximum volume.On: Sets your preferred maximum volume.Notes:• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automaticallybecomes the same as the “Maximum VOL level”.• The volume display can go up to 100 regardless of the settings.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.124Press to display the SET UP menu.35Press to select “OSD Language”.Press for more than 3 seconds.Press to select “Options”.Press to display the Options menu.Press to select your preferred menu.Press to adjust the menu.Press to exit from Options menu.OptionsDisplay Serial NumberShippingOptions Adjustments• The serial number of this device is displayed when “Display Serial Number” is selected in step 3.