Panasonic TH-42LFE6E Operating Instructions Manual

Also see for TH-42LFE6E: Operating instructions Service manual

Contents

Panasonic TH-42LFE6E Operating Instructions Manual Manual pdf 24 page image

24Picture AdjustmentsNotes:• You can change the level of eachfunction (Backlight, Contrast, Brightness,Sharpness) for each Picture Mode.• The setting details for normal, dynamicand cinema respectively are memorizedseparately for each input terminal.• “Backlight” can be adjusted when “ECOMode” is set to “Custom” and “Power save”to “Off”. (see page 31)Advanced settingsOn the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time orthe ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)Item Effect AdjustmentsBacklight Darker BrighterAdjusts luminance of the backlight.Contrast Less MoreSelects the proper brightnessand density for the room.Brightness Darker BrighterAdjusts for easier viewing ofdark pictures such as nightscenes and black hair.Sharpness Less MoreAdjusts picture sharpness.Notes:• Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.2. Adjust the white balance of the dark sections using the “W/B Low R” , “W/B Low G” and “W/B Low B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.• The adjustment values are memorized separately for each input terminal.• The adjustment range values should be used as an adjustment reference.Item Effect DetailsInput level Less MoreAdjustment of parts which are extremely bright and hard to see.Gamma Down UpS Curve 2.0 2.2 2.6W/B HighR Less MoreAdjusts the white balance for light red areas.W/B HighG Less MoreAdjusts the white balance for light green areas.W/B HighB Less MoreAdjusts the white balance for light blue areas.W/B Low R Less MoreAdjusts the white balance for dark red areas.W/B Low G Less MoreAdjusts the white balance for dark green areas.W/B Low B Less MoreAdjusts the white balance for dark blue areas.