Panasonic TH-42LFE6E Operating Instructions Manual

Also see for TH-42LFE6E: Operating instructions Service manual

Contents

Panasonic TH-42LFE6E Operating Instructions Manual Manual pdf 23 page image

23231007050PictureNormalNormaliseNormalBrightnessPicture ModeContrastBacklightAdvanced settingsWhite balance NormalSharpness 50FRAME CREATION MaxFRAME CREATIONImproves motion picture quality by reducing motion blur.Press the left or right button to switch betweenmodes.Off Min Mid MaxNotes:• The mode is memorized per input terminal.• Even if “Normalise” is selected, the Normal setting willnot be restored.• The picture and menu will disappear for a momentif you switch the mode to Off, or switch from Off toanother mode.• “FRAME CREATION” is not available for 42-inchmodels.Press the left or right button to switch between modes.NormalCinemaDynamicNormalFor viewing in standard environments.DynamicFor viewing in brighter environments.CinemaFor use in viewing tone-focused pictures withbrightness reduced.Note:If you would like to change the picture and colour of theselected Picture menu to something else, adjust usingthe items in the Picture menu. (see next page)Picture Adjustments1Advanced settingsEnables fine picture adjustment at a professionallevel (see next page).While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalization)Press the left or right button to switch between modes.Normal Warm CoolPress to display the Picture menu.Press to select the menu to adjust.Select the desired level by looking at the picture behind the menu.Select to adjust each item.Note:Menu that cannot be adjusted is grayout. Adjustable menuchanges depending on signal, input and menu setting.2Press to enter AdvancedSettings.GammaInput levelAdvanced settingsNormalNormalise02.2W/B Low BW/B High RW/B Low RW/B Low GW/B High GW/B High B 505050505050