Panasonic TH-42LFE6E Operating Instructions Manual

Also see for TH-42LFE6E: Operating instructions Service manual

Contents

Panasonic TH-42LFE6E Operating Instructions Manual Manual pdf 44 page image

Input SearchPrimary InputOffSecondary InputInput SearchSearching...4444NormalisationWhen both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or“Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.Press the button on main unit together with button on the remote control and hold for more than 5 seconds.The “Shipping” menu is displayed and the lock is released when it disappears.Options AdjustmentsItem AdjustmentsFunction button assign 1Function button assign 2Set the functions that operates when is pressed.Signal: The “Signal” menu is displayed.Screensaver: The “Screensaver” menu is displayed.ECO menu: The “ECO Mode settings” menu is displayed.Set up TIMER: The “Set up TIMER” menu is displayed.Note:Factory settings are as follows.FUNCTION1 button: SignalFUNCTION2 button: ScreensaverUse the FUNCTION buttonThe menu screen is displayed. (Example: Signal)Cinema realitySignalOff[ Digital ]HDMI Range AutoH-Freq.V-Freq.kHzHz63.9860.02Signal Format 1280×1024/60Dot Clock Freq. MHz108.0Press the FUNCTION button to exit from the menu.Press ACTION ( ) buttonOptions 1/3On screen displayInput SearchOnInitial input OffInput SearchOff: When there is no signal, the input is not switched automatically.All Inputs: Searches all inputs and switches to an input with a signal.Priority: Searches “Primary Input” and “Secondary Input” in order and switches to an input with a signal.Primary Input, Secondary InputSet the input to search when “Priority” is selected.(NONE) PC DVI HDMINotes:• This menu is available only when “Input lock” is “Off”. (see page 43)“Searching...” is displayed during the input search.1 select2 adjustInput SearchWhen a signal is not detected, another input with a signal is automatically selected.