Panasonic TC-26LX600 Operating Instructions Manual

Also see for TC-26LX60 - 26" LCD TV: Operating instructions Operating instructions manual Manual de instrucciones Operating instructions Operating instructions manual

Panasonic TC-26LX600 Operating Instructions Manual Manual pdf 5 page image

8 9Quick Start Guide First Time SetupIdentifying ControlsFirst time setupLanguageAuto programLanguageLanguage EnglishFirst time setupLanguageAuto programAuto programANT InModeStart scanAllCableAuto programANT InModeStart scanCableAllNow scanning analog channel ...ProgressEdit- - -2FavoriteApplyNoYesAddFirst Time Setup“First time setup” is displayed only when the TV is turned on for the first time after the power cord isinserted into a wall outlet.Available only when “Auto power on” (p. 14-15) is set to “Off”.Turn the TV On with the POWERbuttonSelect your languagePress to go to previous screen.Or, select icon, then press OKfor same results.Auto channel setupSelect “Auto program”Select antenna and input modesCable: Cable TV Antenna: AntennaAll : digital and analogAnalog : analog only (Reduces time forscanning)Start scanning the channels• Available channels(analog/digital)are automaticallyset.• If OK is not pressed after selecting “Apply”,the channels will not be memorized.ŶPress to exit or return to previous screen• To change setting later, go to Menu screen (p. 14-15)NotenextselectselectnextEnglish Español FrançaisConfirm registered channelsstartselect“Startscan”select“Apply”oksetselectANT InMode123Identifying ControlsRemote control sensorWithin about 23 feet (7 meters) in front of the TV set.Power indicator (on : red, off : no light)• The TV consumes some power as long as the power cord is inserted into the wall outlet.NoteVolumeMenu navigationsTurns power On/Off(used when the unit Power button is on)Sets the remote to communicate withother equipment (p. 20)VolumeMenu navigationsSelects channels in sequenceMenu navigationsDisplays Main Menu (p. 14-15)Selects input mode (p. 12)Displays or removes the channel banner(p. 10)Switches to previously viewed channeland input mode.Sleep timer (MINUTES) (p. 10)Changes aspect ratio (p. 11, 40)Selects Audio Mode for TV Viewing(p. 10)Selects/OK/ChangeRETURN (to previous menu)Exit (from the menu)Operates the Favorite channel listfunction. (p. 11)GUIDE for DBSSound mute On/OffNumeric keypad to selectany channel or press to enteralphanumeric input in menus. (p. 10)Direct channel access for DTV andDBS (p. 10)Demonstrates picture quality in Vividmode (p. 10, 14-15)External equipment operations(p. 12, 36) (VCRs, DVDs, etc.)POWER buttonSwitches TV/VIDEO Selects channelsin sequenceReceiver LocationHow to use the LCD standLocate at a comfortable distance for viewing. Avoid placing where sunlight or other bright light (including reflections)will fall on the screen.Use of some types of fluorescent lighting can reduce remote control transmitter range.Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat ormoisture.Adjust the stand to your desired angle.The stand angle can be rotated 20 ° to the right / left.• About broadcasting systemsAnalog : traditional TV systemDigital : new system that allows you to viewmore channels featuring high-qualityvideo and sound(NTSC)(ATSC)