22 23AdvancedRecommended AV Connections1AVA N TIN SERVICE ONLY DIGITAL AUDIO OUT2OPTICAL INRecommended AV ConnectionsThese diagrams show our recommendations for how to connect the TV unit to your various equipment.For other connections, consult the instructions of each equipment and the specifications (p. 45).For additional assistance, please visit our website at: www.panasonic.comwww.panasonic.caPower Cord(Connect after all the otherconnections are complete.)Back of the unitŶTo watch camcorderimagesCamcorderVCRDVD PlayerM3 plugHeadphones/Earphones(not supplied)• Individual HDMI equipment may require additional menu settings specific to each model. Please refer to theirrespective operating instruction manuals.• When connecting to HDMI 2, set the input mode to HDMI 2 (p. 12) initially before connecting to HDMI 2. Afterconnection, confirm the HDMI control functions (p. 21).NoteŶTo watch digitalvideo imageDVD Player orSet Top Box(HDMI compatiblemachine only)HDMI cableHDMI-DVIconversion cableConnect with HDMI cable(HDMI 1 is recommended)ŶControl with HDMI(p. 21)DIGA(Panasonic DVD Recorder)AudiocableCable BoxCable TVorDigital Audio OutŶTo watch DVDsDVD PlayerSet Top BoxŶTo listen to the TV throughspeakersAmplifierOptical digitalaudio cableor• Set the TV channel to CH3 or CH4 for using Cable Box Connection.• For further information on Cable Box Connection, consult toyour local cable company.• The picture and audio input signals connected to a terminalspecified in “Prog-out stop” (p. 14-15) cannot be output from“OUTPUT” terminals.However, audio output can be obtained from “Digital AudioOut” terminal.• To prevent howling and image oscillation, set the “Prog-out-stop” setting when connecting VCR with loop-connection.(p. 14)• When equipment (STB, DVD, etc.) is connected to HDMI orCOMPONENT terminals, only audio signals can be obtained.No video signals can be out put.NoteorŶDVD Recorder / VCRororor