6 7Quick Start Guide ConnectionAccessories/OptionIN OUTANT INANT OUTS VideoOUTVideoINAudioOUTLRVideoOUTAudioINLRA N TAccessories/OptionCheck you have all the items shown.AccessoriesƑRemote ControlTransmitter• EUR7613ZF0ƑBatteries for the RemoteControl Transmitter (2)• AA BatteryƑOperating InstructionsƑProduct Registration Card(U.S.A.)ƑCustomer Care Plan Card(U.S.A.)Installing remote’s batteriespushslide opencloseNote the correctpolarity (+ or -).• Incorrect installation may cause battery leakage and corrosion,resulting in damage to the remote control unit.• Do not mix old and new batteries.• Do not mix different battery types (such as alkaline andmanganese batteries).• Do not use rechargeable (Ni-Cd) batteries.• Do not burn or break batteries.• Make a note of the remote control codes before changingbatteries in case the codes are reset. (p. 37-38)Caution12Optional accessoryPlease contact your nearest Panasonic dealerto purchase the recommended wall-hangingbracket. For additional details, please refer to thewall-hanging bracket installation manual.Wall-hanging bracket(vertical)• TY-WK32LR2WWARNING• Failure to use a Panasonic bracket or choosing to mount the unityourself will be done at the risk of the consumer.Any damage resulting from not having a professional installermount your unit will void your warranty.• Always be sure to ask a qualified technician to carry out set-up.Incorrect fitting may cause equipment to fall, resulting in injuryand product damage.• Do not mount this LCD Television directly below ceiling lights(such as spotlights, floodlights or halogen lights) which typicallygive off high heat. Doing so may warp or damage plastic cabinetparts.How to remove the TV-Stand1 2Remove two screwsPull out the plastic portionRemove four screwsPull out the metallic portionFoam mat or thick soft clothConnection• All cables and external equipment shown in this book are not supplied with the TV.• For additional assistance, visit us at: www.panasonic.comwww.panasonic.ca• When connecting video cables, priority is given to the S Video cable when both the S VIDEO input terminal and theVIDEO input terminal are connected.• When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to beoutput through “OUTPUT” terminals.• Some programs contain a copyright protection signal to prevent VCR recording.NoteŶWatching TVPower Cord(Connect after all theother connections arecomplete.)Back of the unitCable BOXS Video signals havepriority.orVHF/UHF aerialDVD Recorder /VCRVideo recorderwith TV TunerTo record TV showsor