Panasonic TC-26LX600 Operating Instructions Manual

Also see for TC-26LX60 - 26" LCD TV: Operating instructions Operating instructions manual Manual de instrucciones Operating instructions Operating instructions manual

Panasonic TC-26LX600 Operating Instructions Manual Manual pdf 10 page image

18 19AdvancedEditing and Setting ChannelsMenuPictureAudioLockSetupTimerSetupCH scan ALLLanguageProgram channelInput labelsCCOther adjustProgram channelAutoManualSignal meterApplyCaption detail---Caption selectPresetAuto programANT InModeStart scanAllCableEdit- - -FavoriteApplyNoAddEditCH12345- - -2- - -- - -- - -FavoriteApply- - -- - -- - -- - -CaptionNoYesNoNoNoAddApply12FavoriteFavoriteSignal meterCHSignal strengthCurrentPeak level85 %85 %2 - 1Auto programANT InModeStart scanCableAllEditing and Setting ChannelsThe current channel settings can be changed according to your needs and reception conditions.21345ŶPress to exitDisplay menuSelect “Setup”Select “Program channel”Select the functionSetŶTo reset the settings of setup menuSelect “Reset” in Setup menu ( ) and press “OK” buttonInput your 4-digit password with number buttonsSelect “YES” on the confirmation screen and press “OK”buttonnextselectnextselectnextselectAutoSetautomaticalltyManualSetmanuallySignalmeterChecksignalstrengthAutomatically searches and adds active channels to memory.Select “ANT In”Select “Mode”•FavoritesetselectUse this procedure when changing setting of receiving channels or changing the channel display.Also, use to add or delete channels from channel list manually.Select “Edit” Edit•Captionselectnextselect item to edit(Caption/Favorite/Add)nextSelect the item to be editedCaption FavoriteAdd• Caption:Changes the station identifier• Favorite:Registers channel to Favorites List• Add:Adds or deletes channelsCheck the signal strength if interference is found or freezing occurs on a digital image.change channelokSignal intensity • Not available if “Cable” is selected in “ANT In”(see above).• Effective only for digital antenna channels.• If the signal is weak, check the antenna.If no problem is found, consult yourlocal dealer.Select “Apply”Press to move cursor to “Apply”•AddPress “OK” button to select “Yes (add)” or “No(delete)”Select the numberRename (maximum 7 characters available)Select the station identifierselectset/nextselectnextok(to enter yourprogram)NoteFavoriteCaption detailPresetSelect All or AnalogAll: Analog and digitalAnalog: Analog only(Select Cable or Antenna)• If “Channel lock” (p. 16) is activated and “Auto”, “Manual” or “Signal meter” is selected, “Enter password.” will be displayed.Settings are madeautomatically• After completing the setting,select “Apply”. (see below ).• All previously memorizedchannels are erased.Select “Start scan” startselect