Panasonic PV-20D52 Operating Instructions Manual

Also see for PV-20D52: Operating instructions

Contents

Panasonic PV-20D52 Operating Instructions Manual Manual pdf 51 page image

51For Your InformationDVD/Video CD/CDPlay fails to start even whenPLAY is pressed...Play starts but then stopsimmediately...Picture is distorted during rapidadvance or rapid reverse...No Forward/Reverse searchplay...Play does not start even whentitle is selected...Audio soundtrack and/orsubtitle language is not the oneselected at the initial settings...No subtitles...Alternative audio soundtrack(or subtitle) language cannotbe selected...Angle cannot be changed...Correction• This unit cannot play discs other than DVDs, Video CDs and CDs.• The disc may be dirty and require cleaning.• Be sure disc is installed with label side up.• The picture will be somewhat distorted at times: this is normal.• Some discs may have sections which prohibit Forward/Reversesearch. (P. 17)• Confirm the “DVD LOCK” setting. (P. 45)• If the audio soundtrack and/or subtitle language selected at DVDinitial settings does not exist on the disc, it will not be accessible.• Subtitles appear only when available on disc.• Select “ON” at the “Changing subtitle language” section (P. 36) todisplay subtitles.• Alternative language cannot be selected with discs which do notcontain more than one language.• For some discs, alternative language cannot be selected with theAUDIO or SUB TITLE button. Try selecting it from the DVD menuif available.• This function is dependent on software availability. Even if dischas multiple angles, they may be recorded for specific scenesonly (ANGLE Indicator on unit lights up). (P. 37)Correction• First, unplug unit. Then, prepare a rigid wire (e.g. an extendedpaper clip, etc.) and, applying moderate force, insert it straightinto the hole at the base of the tray. The tray will eject a little.Now, pull the tray all the way out and remove the disc. (P. 6)MiscellaneousThe disc cannot be removed...Warning and Instruction DisplaysThese displays will alert you of a missed operation or provide further instructions.OSDPLEASE SET CLOCKBEFORE TIMER SETTINGPLEASE CHECK THE DISC, AND FORSTAINS OR SCRATCHES ON DISCCaution• If you attempt to set the On-Timer andthe Clock is not set...• If you press PLAY, or the unit readsdata from a stained or scratched discin DVD mode. Also, if the type of disc isother than DVD, Video CD or CD...Page127