Panasonic PV-20D52 Operating Instructions Manual

Also see for PV-20D52: Operating instructions

Contents

Panasonic PV-20D52 Operating Instructions Manual Manual pdf 11 page image

11Initial Setup*Important: If a remote control button does not work when pressed, press the FM/TV button on theremote and try the button again.Note to CABLE System InstallerThis reminder is provided to call theCABLE (Cable TV) System Installersattention to Article 820-40 of the NECthat provides guidelines for propergrounding and, in particular, specifiesthat the cable ground shall beconnected to the grounding systemof the building, as close to the pointof cable entry as practical.Unit auto adjusts clock for DST (DaylightSaving Time.) Spring (First Sunday in April)DST : ON ->Sets clock ahead one hour. Autumn (Last Sunday in October)DST : ON ->Turns clock back one hour.• If your area does not observe DaylightSaving Time, select DST:OFF.DST (Daylight Saving Time)Manual Clock SetIf AUTO CLOCK SET was incomplete, manuallyset the clock as follows.Press ACTION onthe Remote todisplay SET CLOCKMenu screen.1SET : SETSELECT :END : ACT I O NSET C LOC KDST : O NSE LE C T M ON THPress toselect the monthand press SET toset. In the samemanner, select andset the date, year,time, and DST.2Press ACTION twice to start CLOCKand exit.3Reset all unit Memory FunctionsWhen moving unit to a new location, or if a mistake wasmade in the Initial Setup section.Turn the unitPower on.1Press and hold both PLAY and | onthe unit for more than 5 seconds.• The power will shut off.2LIGHTTITLE MENUDISPLAYADD/DLTPAUSEDSSCABLE+SKIPSKIP PLAYSTOPSLOW/SEARCH+ VOLCHCHVOL10SUB TITLEANGLEZOOMAUDIOOPEN/CLOSECLEARENTERMUTESURROUNDTIMERR-TUNEACTION RETURND V DFM/TVS E TACTIONSELECTSETPOWERPerform “Initial Setup” on page 10.3