Panasonic PV-20D52 Operating Instructions Manual

Also see for PV-20D52: Operating instructions

Contents

Panasonic PV-20D52 Operating Instructions Manual Manual pdf 17 page image

17DVD Operation• Please read the disc jacket for operationinformation.• If a single sided disc is placed in upside down,“PLEASE CHECK THE DISC,AND FOR STAINS OR SCRATCHES ONDISC” is displayed.• Remove disc and press unit POWER off whennot in use.• Disc continues to rotate with menu displayedeven after play is done. Press STOP to clearmenu display when finished with menu. Forward/Reverse rapid scenesearch➛➛➛➛➛ Press SLOW or SLOWduring play.➛➛➛➛➛ Press PLAY to release.• Starting forward/reverse search during playstarted from menu on Video CDs may recallmenu.• Search speed, slow at first, increases witheach additional press of the button up to 5levels. Forward/Reverse Chapter/TrackSkip➛➛➛➛➛ Press SKIP | or | during play.Each press skips a chapter (DVD) ortrack (Video CD/CD).Pressing | SKIP once midway through achapter/track returns to start of that chapter/track.Each additional press skips back one chapter/track.• Pressing SKIP | or | during play startedfrom menu on Video CDs may recall menu. Still (Pause) Picture➛➛➛➛➛ Press PAUSE during play.➛➛➛➛➛ Press PLAY to release.• DVD/Video CD : The unit will enter Still picture mode.• CD : The unit will enter Pause mode. Frame by Frame picture(DVD/Video CD)➛➛➛➛➛ Press PAUSE in Still mode.➛➛➛➛➛ Press PLAY to release.• Each press advances picture one frame.• Hold down for consecutive frame advance.• Whether pictures are advanced by “FRAME” or“FIELD” is selected automatically (see page 48). Slow Motion picture (DVD/Video CD)➛➛➛➛➛ Press SLOW or SLOWin Still mode.➛➛➛➛➛ Press PLAY to release.• Slow motion speed, slow at first, is increasedwith each additional press of the button up to 5levels.• Reverse slow motion is not available for videoCDs.• When appears on the screen while a buttonis being operated, it means that thecorresponding operation is prohibited by theunit or the disc.The unit memorizes the point where STOPis pressed ( flashes on screen).Press PLAY to resume play from this point.Pressing STOP again or opening the traycancels RESUME, however, RESUME is notcanceled when power is turned off and on.• RESUME works only with discs for whichelapsed play time is displayed during play.RESUME functionNotesPower turns off after unit has been in Stopmode (DVD) for about 5 minutes.Auto-Power Off function1. Do steps 1-4 (previous page).When menu appears, press STOP.2. Press number key(s) to select desiredtrack (play begins).• Check disc for track numbers.• Press “1” to start at beginning of disc.To Resume Menu use,Press STOP, and press PLAY, then the menuappears. Now, go to step 5 (previous page).Enjoy Video CDs featuringplayback control withoutusing menus (Video CDs only)*Important: If a remote control button does not work when pressed, press the DVD button on the remoteand try the button again.Chapter/Track Chapter/Track Chapter/T rackChapter/T rackCurrent playback positionReverse Skip Forward Skip