50 For assistance, please call : 1-800-211-PANA(7262) or send e-mail : consumerproducts@panasonic.comBefore Requesting ServiceRemote ControlUnit cannot be controlled...ACTION, SELECT, SET, POWER,etc. buttons cannot be selected...Correction• Aim Remote directly at the remote sensor on the unit. (P. 9)• Avoid any object blocking signal path.• Inspect the remote batteries. (P. 4)• Exposing unit remote sensor to direct fluorescent or outdoorlight may cause signal interference.• Press FM/TV for TV mode. (P. 26)• Press DVD for DVD mode. (P. 26)• Press FM/TV for FM mode. (P. 26)• Check remote batteries.Check the following points once again if you are having trouble with your unit.PowerNo power…Power turns itself off...MonitorNo picture or sound...Poor picture with normal sound...Poor sound with normal picture...Poor TV reception...No color or poor color...Ghost (multiple) images...TV programs cannot be watched...Correction• Make sure your antenna system (TV or CABLE), iscorrectly set. (P. 10)• Completely insert Power Plug into an AC outlet.• Set POWER button to ON.• Adjust BRIGHTNESS, SHARPNESS, and PICTUREcontrols in the SET UP Video Adjustment. (P. 35)• Adjust VOLUME control. (P. 18)• Adjust SHARPNESS and PICTURE controls in the SET UPVideo Adjustment. (P. 35)• Adjust TINT and COLOR controls in the SET UP VideoAdjustment. (P. 35)• Install a directional antenna.• Make sure the selected channel is in unit’s memory. (P. 12)Correction• Completely insert Power Plug into an AC outlet.• Set POWER button to ON.• Auto power-off (shutoff) occurs after about 5 min. in DVDmode with no operation, or if there is no broadcast signal inTV mode. Turn the power back on. (P. 17, 28)If you cannot resolve the problem, please call the Customer Call Center for productassistance at 1-800-211-PANA (7262.)To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262.)or send e-mail to : consumerproducts@panasonic.com