SYSTEM ADMINISTRATOR'S GUIDE308 Installation ManualB7.3 PBX Interface ParametersThree separate parameters are used to program the VPS for optimal signaling and performancewith the PBX.Dialing ParametersThese parameters specify how the VPS will initiate and control call transfers, setup outgoingcalls, and control message waiting lamps on extensions. The procedure for verifying thecorrect code sequences for non-Panasonic KX-T series telephone systems is to manuallyexecute the sequences from a single line telephone (SLT) with the PBX.To access the proper menu for PBX Interface Parameters, follow the menu path asshown:System Administration Top Menu-1-6-3To access the proper menu for Dialing Parameters, follow the menu path as shown:System Administration Top Menu-1-6-3-1Table 76Parameter Value Range(Default)Description/FunctionPBX Type 1. Other Manufacturers2. KX-T Series1. T3082. T6163. T1232/TA series4. T965. T3366. TD8167. TD1232/TA12328. TD5009. TD308(KX-TVS120/KX-TVS220: TD1232;KX-TVS320: TD500)Specifies the type of PBX connected to the VPS. Inthe case of a Panasonic KX-T series telephonesystem, the model number should also be specified.Note: The Dialing Parameters are set automatically toeach PBX default value after selecting the PBX type.
