|
Station Programming92 User Manual2.2.12 Preferred Line Assignment — OutgoingAllows you to select the desired outgoing line preference to originate calls from the followingthree line preferences:a) No Line Preferenceb) Idle Line Preferencec) Prime Line Preference (INTERCOM) (— default*1 )Follow the programming procedure according to your selection.Note• If "Idle Line Preference," "No Line Preference" or "Prime Line Preference (S-CO, G-CO or L-CO)" is selected, it is not possible to access any PT features after going off-hook. To access these PT features, press the INTERCOM (ICM type PT) or PDN (DNtype PT) button before or after going off-hook.No Line Preference — Outgoing (Assignment)When you go off-hook to make a call, you are not connected to any line. You must choose theline.— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].— To exit the Station Programming mode: Press [PROGRAM].*1 If PT is DN type, then the default is PDN.PTDial 1. Press STORE.Dial 1.11 AUTO DIALSTOREThe STORE indicator lights.The display shows the initialprogramming mode.The display shows the currentstatus.Pref.Out:No
|
