|
Station Programming50 User Manual2.1 Station Programming Instructions2.1.1 Station Programming InstructionsStation Programming allows you, the Proprietary Telephone (PT) users, to program certainfeatures from your telephone individually. To program, you need to switch your telephone tothe Station Programming mode. During programming mode, your telephone is in the busycondition to both inside and outside callers. If you want to make a normal call handlingoperation, you must finish the programming mode.Programming Mode DisplayWhen you enter into the Station Programming mode, the display shows the following messageas the initial programming mode;We recommend a PT with display for Station Programming to avoid mis-operation.The display also gives you helpful or stored data information related to your programmingsteps. In this section, we note the display example in the programming steps, if required. Youcan also refer to the "Display Examples" in Section "6 Appendix."Entering Station Programming modePT-PGM ModePTPress PROGRAM. Dial 99.PROGRAM9 9Be sure that the telephone is idle and on-hook.PT-PGM ModeIf there is no entry within one minute, the Station Programming modeis canceled and normal call handling mode resumes automatically.The STORE indicator lights.If 99 is not dialed within 5 seconds after the PROGRAM button ispressed, the Station Programming mode is canceled.Initial programmingdisplay
|
