User Programming108 User Manual3.1 User Programming Instructions3.1.1 General Programming InstructionsUser Programming allows you, any PT extension user who knows the User ProgrammingPassword, to program the following system features from your telephone individually.• 3.2.1 [000] Date and Time Set• 3.2.2 [001] System Speed Dialing Number Set• 3.2.3 [002] System Speed Dialing Name Set• 3.2.4 [004] Extension Name Set• 3.2.5 [005] Flexible CO Button Assignment• 3.2.6 [006] Caller ID Dial Set• 3.2.7 [007] Caller ID Name Set• 3.2.8 [008] Absent Messages Set• 3.2.9 [009] Quick Dial Number Set• 3.2.10 [010] DISA / TIE User Code SetTo program, you need to switch your PT extension to the User Programming mode.During the programming mode, your extension is treated as a busy extension.If you want to make a normal call operation, you must finish the programming mode.Default SettingThis system has default factory settings.Required Telephone SetOne of the following Proprietary Telephone (PT) sets with display is required for UserProgramming:• Digital Proprietary Telephone (DPT): KX-T7436, KX-T7433,KX-T7431, KX-T7235,KX-T7230• Analog Proprietary Telephone (APT): KX-T7130, KX-T7030, KX-T7330, KX-T7335Soft Buttons and SHIFT Button on the Display PTThree soft buttons are provided just below the display of the following Digital ProprietaryTelephones (DPTs): KX-T7230, KX-T7235, KX-T7433, KX-T7436.Functions of these Soft buttons vary as the programming procedures advance step by step.Those functions that are currently assigned to the buttons are shown on the lower line of thedisplay. If the SHIFT button indicator is on, two functions are available for each Soft button.To alternate between the two functions, press the SHIFT button on the right side of the display.
