Station Features and Operation (PT/SLT)270 User Manual4.3.37 FlashYou can disconnect the current call and make another call without hanging up.Conditions•Flash or External Feature AccessPressing the FLASH button on a PT results in either sending Flash signal (External FeatureAccess) or disconnecting the current call (Flash). This is determined by SystemProgramming and "4. FLASH button operation when "Don't release the trunk" is selected at #3" in theProgramming Guide>.•Pressing the FLASH button re-starts the conversation duration, outputs an SMDR recordand checks toll restriction level again.Programming Guide References• 2.8 System Option– FLASH button operation while CO talking– FLASH button operation when "Don't release the trunk " is selected at #3• 3.2 Trunk Group– Disconnecting TimeFeatures Guide References1.12 Conversation Features• External Feature Access• FlashUser Manual References• 4.3.35 External Feature AccessPTPress FLASH. Dial the phone number.phone no.While hearing any tone, dialing, or talking;Dial toneFLASH