Station Features and Operation (PT/SLT)376 User Manual4.3.73 System Speed DialingAllows you to make a call using speed dial numbers programmed previously. This systemsupports 2000 speed dial numbers which are available to all extension users.Conditions• System Speed Dial numbers must be stored either by User or System Programming.• Tenant ServiceIf "Tenant Service" is employed, up to 2000 Speed Dialing codes can be shared among eachtenant under the condition of up to 1000 codes per tenant.• Toll Restriction Override for System Speed DialingOverriding Toll Restriction for System Speed Dialing can be activated or deactivated pertenant by System Programming.•Continuous use of a speed dial number is possible, if the number is divided when stored.If the number is divided and stored in System Speed Dial numbers 001 and 002;Press: [AUTO DIAL/STORE] [0] [0] [1] [AUTO DIAL/STORE] [0] [0] [2]•You may press a CO button to select a desired CO line before pressing the AUTO DIAL/STORE button.•Combination dialing"Speed Dialing," "One-Touch Dialing," "Redial, Last Number/Saved Number" and manualdialing can be used in combination.•The dialed number appears on the display.• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this featureusing the display operation.PT and SLTLift the handset or pressSP-PHONE/MONITOR.system speed dial no.Enter a system speed dial number(000 through 999).For SLT, PTFor PTFor PT: Press AUTO DIAL/STORE.For SLT, PT: Dial .AUTO DIALSTORE• The AUTO DIAL/STORE indicator lights.• No tone is heard.• The AUTO DIAL/STORE indicatorlight turns off.
