|
Station Features and Operation (PT/SLT)User Manual 1594.3.2 Account Code EntryAn Account Code (max. 10 digits) is used to identify incoming and outgoing CO calls foraccounting and billing purposes. The account code is appended to the "Station Message DetailRecording (SMDR)" call record. For incoming CO calls, account code entry is optional. Foroutgoing CO calls, you may be required to enter an account code. This depends on yourAccount Code Entry mode determined by System Programming on a "Class of Service *1 " basis.Entering account codes before dialing*1 Class of Service (COS) is used to define the features which are allowed for a group of extensions.7230 / 7235 / 7433 / 7436Confirmation toneand dial tonephone no.Dial the phonenumber.Press CO.Press ACCNT (S3). Dial #.COACCNTS1 S2 S3 account codeEnter an account code(10 digits max., 0...9).Dial tone 3*One of the dial tones. Refer to the "Tone List" in the Appendix.*Enter ACCNT CodePT and SLTaccount codeEnter an account code(10 digits max., 0...9).Confirmation toneand dial toneFor PT: Press Account(flexible button).For SLT, PT: Dial 49.Lift the handset or pressSP-PHONE/MONITOR.Press CO or enter a lineaccess code(9 or 801 through 848).Dial the phone number.phone no.line access codeDial tone 3*For SLT, PTFor PTCO4 9If you dial a feature number,you hear no tone.(Account)Dial #.One of the dial tones. Refer to the "Tone List" in the Appendix.*Lift the handset or pressSP-PHONE/MONITOR.
|
