CFG_PKEY_PATHValue Format STRINGDescription Specifies the URI where the private key is stored.Value Range Max. 384 charactersDefault Value Empty stringHTTP_SSL_VERIFYValue Format INTEGERDescription Specifies whether to enable the verification of the root certificate.Value Range • 0 (No verification of root certificate)• 1 (Simple verification of root certificate)• 2 (Precise verification of root certificate)Note• If set to "0", the verification of the root certificate is disabled.• If set to "1", the verification of the root certificate is enabled. Inthis case, the validity of the certificate’s date, certificate’s chain,and the confirmation of the root certificate will be verified.• If set to "2", precise certificate verification is enabled. In thiscase, the validity of the server name will be verified in additionto the items verified when "1" is set.• If the unit has not obtained the current time, verification will notbe performed irrelevant of this setting. In order to performverification it is necessary to first set up the NTP server.Default Value 05.3.6 Firmware Update SettingsFIRM_UPGRADE_ENABLEValue Format BOOLEANDescription Specifies whether to perform firmware updates when the unit detects anewer version of firmware.Note• Manual firmware updates from the Web user interface (® see4.7.3 Upgrade Firmware) can be performed regardless of thissetting.• Firmware updates using TR-069 can be performed regardlessof this setting.Value Range • Y (Enable firmware updates)• N (Disable firmware updates)Document Version 2015-02 Administrator Guide 1735.3.6 Firmware Update Settings
