Panasonic KX-HDV100 Administrator's Manual

Also see for KX-HDV100: Operating instructions Supplement for administrator guide Supplement for administrator guide

Contents

Panasonic KX-HDV100 Administrator's Manual Manual pdf 133 page image

4.6.5.4 Stutter ToneTone FrequenciesDescription Specifies the dual-tone frequencies, in hertz, of stutter dial tones tonotify that a voice mail is waiting, using 2 whole numbers separated bya comma.Value Range 0, 200–2000 (0: No tone)Note• If the value for this setting is "350,440", the unit will use a mixedsignal of a 350 Hz tone and a 440 Hz tone.Default Value 350,440Configuration File Reference DIAL_TONE4_FRQ (Page 248)Tone TimingsDescription Specifies the pattern, in milliseconds, of stutter dial tones to notify thata voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,on 2…) separated by commas.Note• It is recommended that you set a value of 560 milliseconds ormore for the first value (off 1).Value Range 0–16000 (0: Infinite time)Note• Avoid setting 1–50 for any of the values.Default Value 560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,0Configuration File Reference DIAL_TONE4_TIMING (Page 248)4.6.5.5 Reorder ToneTone FrequenciesDescription Specifies the dual-tone frequencies, in hertz, of reorder tones using 2whole numbers separated by a comma.Value Range 0, 200–2000 (0: No tone)Note• If the value for this setting is "480,620", the unit will use a mixedsignal of a 480 Hz tone and a 620 Hz tone.Default Value 480,620Configuration File Reference REORDER_TONE_FRQ (Page 250)Document Version 2015-02 Administrator Guide 1334.6.5 Tone Settings