Panasonic KX-FLB881E Operating Instructions Manual

Also see for KX-FLB881E: Quick reference guide

Contents

8. Programmable Features658.8 Network features (LAN connection only)These features can be programmed only by using the web browser.Note:L See the following sections for details on these related features:– Change password (feature #155 on page 53)– DHCP mode (feature #500 on page 63)– IP address (feature #501 on page 63)– Subnet mask (feature #502 on page 63)– Default gateway (feature #503 on page 63)– DNS server #1 (feature #504 on page 63)– DNS server #2 (feature # 505 on page 63)– Machine name (feature #507 on page 63)– IP filtering (feature #532 on page 63)– Auto IP (feature #533 on page 63)– HTTPD (feature #534 on page 64)Feature Tab SelectionSetting the locationwhere you use this unit[LAN FEATURE] Enter the location information of the unit.SMTP setting for scan toe-mail (via e-mailserver)[E-MAIL FEATURE] Enter the SMTP server information to send scannedimage from the unit via e-mail server. Consult yourservice provider or network administrator for details.Setting the error notifyfeature[ERROR NOTIFY] [ENABLED]: The unit will send an e-mail to registereddestinations when the printing problem occurs.[DISABLED] (default): Deactivates this feature.SMTP setting for errornotify feature[ERROR NOTIFY] Enter the SMTP server information to send an errornotify e-mail.Registeringdestinations for errornotify feature[ERROR NOTIFY] Enter the e-mail address to which error notify will besent, and select the type of problems.