6. Fax476.11 Junk fax prohibitor(preventing fax reception fromundesired callers)If you subscribe to Caller ID service (page 49), thisfeature prevents fax reception from calls that do notshow caller information.Additionally, the unit will not accept faxes originatingfrom numbers that match the ones on a programmablejunk fax prohibitor list.Important:L This feature does not work when manualreception is performed.6.11.1 Activating the junk fax prohibitor1 Press {MENU} repeatedly to display “JUNK FAXPROH.”. i {>}2 Press {V} or {^} repeatedly to select “ON”. i{SET}3 Press {STOP} to exit.6.11.2 Storing undesired callersYou can register up to 20 undesired numbers from theCaller ID list (page 49) if you do not wish to receive faxesfrom them.1 Press {MENU} repeatedly to display “JUNK FAXPROH.”.2 Press {>} repeatedly to display “JUNK LIST SET”.i {SET}3 Press {V} or {^} repeatedly to display the party youwish to prevent fax reception from. i {SET}4 Press {STOP} 2 times to exit.To display the junk fax prohibitor list1. Press {MENU} repeatedly to display “JUNK FAXPROH.”.2. Press {>} repeatedly to display “JUNK LISTDISP.”. i {SET}3. Press {V} or {^} to display the items on the list.4. Press {STOP} to exit.To print the junk fax prohibitor list1. Press {MENU} repeatedly to display “JUNK FAXPROH.”.2. Press {>} repeatedly to display “JUNK LISTPRINT”. i {SET}3. Press {STOP} to exit.To erase an item from the junk fax prohibitor list1. Press {MENU} repeatedly to display “JUNK FAXPROH.”.2. Press {>} repeatedly to display “JUNK LISTDISP.”. i {SET}3. Press {V} or {^} repeatedly to display the desireditem. i {<}L To cancel erasing, press {STOP}, then press{MENU}.4. {SET} i {MENU}