Panasonic KX-FLB881E Operating Instructions Manual

Also see for KX-FLB881E: Quick reference guide

Contents

2. Preparation21For the subnet mask:1. Press {5}{0}{2}.SUBNET MASKPRESS SET2. {SET} i Enter the subnet mask of thenetwork. i {SET}For the default gateway:1. Press {5}{0}{3}.DEFAULT GATEWAYPRESS SET2. {SET} i Enter the default gateway of thenetwork. i {SET}4 Press {MENU} to exit.5 Install Multi-Function Station on the computer thatyou want to use it with. See page 21 for details.To correct a mistake in the IP address, subnet mask,or default gatewayPress {<} or {>} to move the cursor to the incorrectnumber, and make the correction.2.9.3 Setting the computer for PC faxreceptionYou need to select the computer that will be used forreceiving faxes.L Make sure PC fax setting is turned ON beforehand(feature #442 on page 57).1 {MENU} i {#}{4}{4}{3} i {SET}2 Press {V} or {^} repeatedly to select the desiredcomputer. i {SET}3 Press {MENU} to exit.Note:L If the unit is not connected to the LAN, the computerconnected to the unit by USB is assigned as thedefault computer for PC fax reception.L To select the desired computer easily, change the PCname beforehand (page 24).2.10 Installing Multi-FunctionStation2.10.1 Required computer environmentPanasonic Multi-Function Station software enables theunit to carry out the following functions:– Printing on plain paper, transparencies, labels andenvelopes– Scanning documents and converting an image intotext with Readiris OCR software– Scanning from other applications for Microsoft®Windows® that support TWAIN scanning– Storing, editing or erasing items in directories usingyour computer– Programming the features using your computer– Sending, receiving fax documents using yourcomputerTo use Multi-Function Station on your computer, thefollowing are required:Operating System:Windows 98/Windows Me/Windows 2000/WindowsXP/Windows Vista™ operating systemCPU:Windows 98: Pentium® 90 MHz or fasterWindows Me: Pentium 150 MHz or fasterWindows 2000: Pentium 166 MHz or fasterWindows XP: Pentium 300 MHz or fasterWindows Vista: Recent Processor (x86) 800 MHz orhigher processorRAM:Windows 98: 24 MB (32 MB or more recommended)Windows Me: 32 MB (64 MB or more recommended)Windows 2000: 64 MB or moreWindows XP: 128 MB or moreWindows Vista: 512 MB or moreOther Hardware:CD-ROM driveHard disk drive with at least 150 MB of available spaceUSB interfaceLAN interface (10Base-T/100Base-TX)Other:Internet Explorer® 5.0 or laterWarning:L To assure continued emission limit compliance;– use only shielded USB cable.– use only shielded LAN cable (category 5 straightcable).Note:L Be sure to use a Hi-Speed USB 2.0 certified cable ifyour computer is equipped with the Hi-Speed USB2.0 interface.L USB cable is not supplied. Please purchase ashielded Type-A male/Type-B male USB cable.