6. Fax412 Press {V} or {^} repeatedly to display the desiredbroadcast memory (“”,“” or “”). i{MENU} i {*}3 Press {V} or {^} repeatedly to display the desireditem you want to add. i {SET}L To add other items, repeat this step (up to 20items).4 {STOP}Note:L When adding new items to the MANUALBROADCAST memory, you can only select storeditems.6.4.3 Erasing a stored item from thebroadcast memory1 {DIRECTORY}2 Press {V} or {^} repeatedly to display the desiredbroadcast memory (“”,“” or “”). i{MENU} i {#}3 Press {V} or {^} repeatedly to display the desireditem you want to erase.L To cancel erasing, press {STOP}.4 {SET} i {SET} i {STOP}6.4.4 Sending the same document to pre-programmed partiesTo send the same document using the scanner glass1. Set the original (page 16).2. If necessary, change to the desired resolution (page37) and the desired contrast (page 37).3. Press {BROADCAST} (1–2) or {MANUALBROAD}.L To send a single page, skip to step 5.L To send multiple pages, go to the next step.4. Place the next page. i {SET}L To send more pages, repeat this step.5. {START}L After transmission, the unit will automatically printa report (broadcast sending report).Note:L To stop sending, see page 68.L If you select “FINE”, “SUPER FINE” or “PHOTO”resolution, the number of pages that the unit cansend will decrease.L If the document exceeds the memory capacity,sending will be cancelled.L If a party is busy or does not answer, it will be skippedand redialled later up to 5 times.To send the same document using the autodocument feeder1. Set the original (page 16).2. If necessary, change to the desired resolution (page37) and the desired contrast (page 37).3. Press {BROADCAST} (1–2) or {MANUALBROAD}.
