Panasonic EBL512 Operating Instructions Manual

Also see for EBL512: Specification sheet Specification sheet Specification sheet Operating instructions User manual

Panasonic Electric Works Fire & Security Technology Europe ABMEW00748 Rev: 1 Operating Instructions Fire alarm system EBL512 V2.3.x6619 New system program (S/W) versiondownloadThe latest version of the EBL512 S/W (system program) is factorydownloaded before the delivery. Due to continual development andimprovement, different S/W versions can be found.The valid S/W version can be read in menu H3 or via Win512. NewS/W can on site be downloaded via Win512. See also the Win512help chapter (help topic) "Download Software".New S/W for the 1728, 1735 / 1736 & 1826 / 1828 units (connected toan Ext. FBP/DU interface board 1587) can also on site be downloadedvia Win512. See the Win512 help chapter (help topic) "Display unitmenu" and the "Technical Description" for the unit respectively.19.1 A single control unit (c.i.e.)A single c.i.e. must not have a TLON connection board 1590mounted. 62To download a new software (system program) version, a PC andWin512 are used. Before download, the PC has to be connected tothe "D" connector J1 in the control unit main board 1556 in question.1. Start Win512. In the "Tools" menu open the "Downloadsoftware" dialog box and do the required settings, e.g. the path forthe S/W (.BIN) file and/or the language (.SST) file63 . Do notforget to mark the checkbox respectively.2. Set the c.i.e. in "Bootstrap mode", i.e. set jumper "JP1 (BOOT)" inposition on the main board 1556.3. Do a reset/restart, i.e. set jumper "JP4 (RESET)" in positionmomentarily (approx. 1 second).4. The buzzer will now sound intermittent and LED "LD101" startsblinking64 , indicating that the control unit is in "Bootstrap mode".5. Start the downloading (click "Download"). The buzzer will nowbe silenced and LED "LD101" is turned on (continuously).62 When a c.i.e. has a TLON connection board 1590 mounted, it is expectedto be one c.i.e. in a TLON network and TLON network programming isrequired.63 Normally only download of the new S/W file is required. If, after thedownload and restart, a message is displayed that a new text (language) filealso is required, download it as well.64 Also the LED "System fault" (L14) starts blinking.