Panasonic EBL512 G3 User Manual

Also see for EBL512 G3 5000: Information Planning guide Planning Instructions Operating instructions

Panasonic Eco Solutions Nordic ABMEW01603 Rev: - EBL512 G3 version 2.0.x, Daily user's manual177.3 Open doors (U3)If any door in the system is open, the open door symbol is shownup to the right in the display's symbol area.Cont. from , page 15.U1 Disablement Press (  ) two times.U3 Open doors Press ( ).The list is dynamic, i.e. you can scroll in the list with (  ) or (  ).If a printer is available the Soft key "Print" is shown and can be usedto start a print-out.➒ To leave a menu press ESC.To leave the menu system press the Soft key "Escape menu".7.4 Sensor values (U4)Cont. from , page 15.U1 Disablement Press (  ) three times.U4 Sensor values Press ( ).Use the keypad to enter the technical number and/or press ( ). This is a list, i.e. you can scroll in the list with (  ) or (  ).Depending on if it is a heat, smoke or multi detector the informationlooks different.If a printer is available the Soft key "Print" is shown and can be usedto start a print-out.❿ To leave a menu press ESC.To leave the menu system press the Soft key "Escape menu".NOTE! The Performance factor and the Min. and Max values areupdated at midnight, i.e. the values are from the previous day.If the week average sensor value ("Weekly") is 00.0%/m, leave menuU4 and open it again after approx. 2 minutes.EscapemenuEscapemenuPrintPrint