Panasonic AY-RP500 Installation Manual

Also see for AY-RP500: Installation manual Service manual

Contents

Panasonic AY-RP500 Installation Manual Manual pdf 56 page image

541. Check with "Device Setup" on the "Special" panelthat the device settings agree with the connections.2. Clips can be created using the manual digitizer.(About 5 each of Ado, Vdo, A/V)Check that an NTSC image is shown in the lowerright part of the VGA monitor.3 . Clips can be created using the batch digitizer.(About 5 each of Ado, Vdo, A/V)Check that an NTSC image is shown in the lowerright part of the VGA monitor.4. Clips can be created using the title editor.(About 5)5 . Transition settings can be made using thesequence editor, and can be reproduced asper the settings.Transition time is 50 frames. Check by "Preview"that the following wipe operation is normal. Thetransition panel is shown for reference (page 55).• Basic (H, V, Square, Round, Star, Heart; 5 fromthe right on the third line from the bottom; 4 fromthe right on the first line from the bottom; CUT,MIX)• Slide (1, 2, 3, 4 from the left on the first line fromthe top; all on the fourth line from the top; 1, 2from the left on the fifth line from the top)• Compress (All on the third line from the top)• Zoom (1 from the left on the first line from the top;1 from the left on the second line from the top; 1from the left on the third line from the top; 1 fromthe left on the fourth line from the top)• Zoom + Fade (1 from the left on the first line fromthe top; 1 from the left from the second line fromthe top; 1 from the left on the third line from thetop; 1 from the left on the fourth line from the top)6 . Title settings can be made using thesequence editor, and can be reproduced asper the settings.7 . Video key settings can be made using thesequence editor, and can be reproduced asper the settings.8 . Audio Modify (Level (channels 1 and 2), VR,Balance VR, Master VR) settings can be madeusing the sequence editor, and can bereproduced as per the settings.9 . Rendering operation by the sequence editor isnormal.Render those parts which include transitions, keyvideo, and key title. The rendered clips arecreated as per the settings.10. The results of editing using the sequenceeditor can be saved as clips. They can bereopened and reproduced.11. Check trim mode operations with the sequenceeditor.Check also that two NTSC windows are shown inthe lower left part of the VGA monitor.12. Check the images in the NTSC windows in thelower left part of the VGA monitor.Check that the images in the windows are correctwhen clip in and out points are selected.13. Check the frame accuracy with the clip editor.Check that the clips created using the batchdigitizer have correct frame accuracy.14. Sequence data can be recorded by a videotaperecorder by Rec To Video.Also adjust the timecode, video, and frameaccuracy, and check that sequence data isrecorded as per the settings.DVEdit INSPECTION DETAILS