Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410: Manual Brochure & specs Specifications

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 34 page image

344. SpecificationsPower supply: AC 100 V to 240 V, 50/60 HzPower consumption: 88 Windicates safety information.Video inputs(13 signal lines, maximum)Standard SDI: 8 signal lines (SDI INPUT 1 to SDI INPUT 8)p The up‑converter function can be used for the SDI INPUT 5 toSDI INPUT 8 connectors.BNC 8Standard DVI‑D: 1 signal line DVI‑D 1Optional: Up to 4 additional signal lines (IN A1, IN A2, IN B1, IN B2)(Up to two option boards can be installed in the two input/output slots.)Video outputs(10 signal lines, maximum)Standard SDI:5 signal lines (SDI OUTPUT 1 to SDI OUTPUT 5 1 line each,2 distributed outputs for SDI OUTPUT 1 only)BNC 6Standard DVI‑D: 1 signal line DVI‑D 1Optional: Up to 4 additional lines (OUT A1, OUT A2, OUT B1, OUT B2)(Up to two option boards can be installed in the two input/output slots.)p PGM, PVW, AUX1 to AUX4, MV (MULTI_VIEW), CLN, KEYOUT and MEM PVW can beassigned to SDI OUTPUT 1 to SDI OUTPUT 5, DVI‑D OUT, OUT A1, OUT A2, OUT B1 andOUT B2.p CLN can be pre‑selected from KEY or DSK using a menu.Signal formats SD 480/59.94i, 576/50iHD 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF*, 1080/23.98PsF**: The following option boards are not supported:AV‑HS04M1, AV‑HS04M2, AV‑HS04M3, AV‑HS04M4, AV‑HS04M5,AV‑HS04M6, AV‑HS04M7Signal processing Y:P B:PR 4: 2: 2, 10 bit (8 bits for video memory)RGB 4:4:4, 8 bitME number 1MESDI inputs HD‑SDI: HD Serial digital (SMPTE 292M)SD‑SDI: SD Serial digital (SMPTE 259M)8 signal lines, standard: IN1 to IN812 signal lines, maximum: IN A1, IN A2, IN B1, IN B2(When two AV‑HS04M1 boards are used; with active through)HD: SMPTE 292M (BTA S‑004B) standard complied with• 0.8 V [p‑p] 10 % (75 )• Automatic equalizer More than 100 m (328 ft) (when 1.5 Gbps/5C‑FB cable is used)SD: SMPTE 259M standard complied with• 0.8 V [p‑p] 10 % (75 )• Automatic equalizer 200 m (656 ft) (when 5C‑2V cable is used)