Panasonic AV-HS410N Operating Instructions Manual

Also see for AV-HS410: Manual Brochure & specs Specifications

Panasonic AV-HS410N Operating Instructions Manual Manual pdf 14 page image

14Installation and connectionspw Connections with other devicespq Block diagramSDI Input1 to 8Memory cardInputA1, A2InputB1, B2OutputA1, A2OutputB1, B2BlackSTILL1, 2CLIP1, 2InputmatrixColorBarColorBKGD1, 2 SDI OUTPUT1-1, 1-2OutputmatrixSDI Output1-1, 1-2 (*3)SDI OUTPUT2 to 5 SDI Output2 to 5DVI-D Output~ AC IN PowerAC/DCSDI IN5 to 8FSUCVPrcDbyDDVI-D OUTScalerSDI IN1 to 4FSVPrcDbyDBKGDCUT, MIX, WIPE, DVEKEYCUT, MIX, WIPE, DVEAUX 1 to 4WFMMEM PVWFTBMulti ViewDSKCUT, MIXPinP1, 2CUT, MIXOption slot AOption slot BREF IN/OUT (*1)REF OUT (*2)Reference signalTALLY/GPI 1Dsub 15GPI-IN: 8GPI-OUT: 19ALARM OUT: 1GND: 2TALLY/GPI 2Dsub 15Editing controllerAux panelVTR, etc.SwitchinghubCOMDsub 9 EDITORDsub 9LANRJ45Remote cameraAux panelComputer(*4)(*5)DVI-D INScalerDVI-D Input*1: When external synchronization is selected as the reference signalsetting, the reference signal is input.When internal synchronization is selected, the reference signal isoutput.*2: When external synchronization is selected as the reference signalsetting, the signals are looped through and output.When internal synchronization is selected, the reference signal isoutput.*3: Two sets of the same output signals are distributed fromSDI OUTPUT 1.*4: Use a crossover cable when connecting the unit and anotherdevice on a 1:1 basis without going through a switching hub.*5: Use a switching hub.Proceed with the connections after reading the section entitled“Network security” (on page 6).