322. Preparations2-2-4. Setting the system formatOne system format (input/output signal) can be selected.1 Press the s button to light its indicator, and display theSystem menu.2 Use [F1] to display the Format sub menu.3 Use [F2], select the format using the Format item, andpress the [F2] to enter the selection.Setting the 16:9 squeeze modeWhen the 16:9 squeeze mode is selected, a border width(wipe or PinP) is established that considers cases where SDformat images are to be converted into the 16:9 aspect ratioand used.This setting is possible when SD is selected as the systemformat setting.On the Format sub menu, use [F4] to select whether tosupport the squeeze mode using the 16:9 Squeeze item.On The squeeze mode is supported.Off The squeeze mode is not supported.Border width (graphical representation) when the squeezemode is supportedSqueeze (4:3) 16:92-2-5. Setting the date and timeThe user can set the date and time to be used as the memorycard’s time stamp.Be absolutely sure to set them when an memory card is to beused.Setting the date1 Press the s button to light its indicator, and display theSystem menu.2 Use [F1] to display the Date sub menu.3 Use [F2] to set the year using the Year item.4 Use [F3] to set the month using the Month item.5 Use [F4] to set the day using the Day item.6 Press the [F5] to enter the year/month/day.Setting the time1 On the System menu, use [F1] to display the Time submenu.2 Use [F2] to set the hour using the Hour item.3 Use [F3] to set the minutes using the Minute item.4 Use [F4] to set the seconds using the Second item.5 Press the [F5] to enter the hour/minutes/seconds.