174 Setup: Changing SettingsChanging SettingsThe menus superimposed on the LCD monitor and a monitor (when the SUPER switch on the upper front panel is set to “ON”)connected to the MON OUT, SD SDI MON OUT or SDI OUT connector make it possible to change settings. Superimposedinformation to the output connectors can be selected in setup menu No.005 (SUPER).1 Press the MENU button.The setup menu screen appears on the LCD monitor andthe counter display indicates the setup menu number.2 Select the file to change.Hold down the SHIFT button and press the right cursorbutton (a) or the FF button to go to the next file, pressthe left cursor button (b) or the REW button to go tothe previous file.3 Select items to change.Turn the search dial or press the up or down cursor button(▲/▼) to move the cursor (*) to the item you want tochange.• Use the search dial in JOG mode.• Turn the dial clockwise to increment item numbers(001➝002➝003➝004➝) and counterclockwise todecrement them.• To switch to the next item, hold down the PLAYbutton and press the FF button or the + button. Toswitch to a previous item, hold down the PLAY buttonand press the REW button or the – button.4 Change set values.Select the item to change, hold down the SEARCH buttonand turn the search dial or press the left or right cursorbutton (b / a) to change the setting.• Turn the dial clockwise (or press the right cursor button(a)) to increment the set number and turn itcounterclockwise (or press the left cursor button (b)) todecrement it.• Release the SEARCH button after making the change.• In the SHTL mode, set the search dial to the centerposition or items will move.• Repeat the operations described in steps 3 and 4 whenthere are more items to change.• Press and hold the SEARCH button and press the RESETbutton to reset the set values to the factory defaults.5 Finalize the change.Press the MENU button.In the confirmation message that appears, press the SETbutton to accept the change or press the EXIT button tocancel it. The menu closes after this operation.Change Operations1,522,32,3 4533,45Making changes using the PF buttons2 1,3
