Panasonic AJ-HPD2500P Operating Instructions Manual

Also see for AJ-HPD2500E: Operating instructions

Contents

Panasonic AJ-HPD2500P Operating Instructions Manual Manual pdf 142 page image

142 Connections: Connecting This Unit to a NetworkSelect [USER LOGIN SETTING] and open any of the followingscreens to make the required settings.■ New user registration1 Press the MENU button to open the menu.2 Select [NEW USER] and press the SET button.Enter user name and password in the screen forregistering users.After entering the user name, press the LAST X button tomove the cursor to the “PASSWORD” field, then input apassword.Press the LAST X button again to move the cursor to the“RETRY PASSWORD” field, and input the same passwordyou entered immediately before.◆ NOTE:• If you click [OK] without entering a password, “CANNOT ADD!NO INPUT!” appears.■ Changing password and deleting user1 Move the cursor to the user whose password is to bechanged or deleted.2 Select [DELETE USER] or [CHANGE PASSWORD]from the menu.3 To change password, change it on the screen forchanging passwords.◆ NOTE:• A password should be between 6 to 15 characters long.• Use the LAST X button to go between items in the screens forregistering users and changing passwords.Use the steps below to save settings to SD memory cards orload settings from SD memory cards.■ Loading settings from an SD memory card1 Open the network screen.2 Press the MENU button.3 Use the cursor buttons to choose [LOAD FROM SDCARD] and press the SET button.4 Select the file you want to load from the list of setupfiles that appears and press the SET button.User settings for server serviceSaving and loading settings